You are currently viewing MMI 3G – Video in motion – VCDS coding

MMI 3G – Video in motion – VCDS coding

Hello,

I will show you how to enable VIM – Video in motion. As default when you are driving mmi will disable video, so you will only hear music/voice, when you stop the car view is going back again.

This mod will enable video when you drive the car. Please be awared! this feature is quite danger and not recommended to everyone.

Instructions

  1. Select control module 5F in VAG-COM/VCDS
  2. Select “Advanced ID – 1A
  3. Submit the value from the “Serial number” field in this form (CLICK). If there’s more than one serial number, use the first one!
  4. Select “Security Access – 16
  5. Enter the personal login-code generated bellow.
  6. Press “Do It!“. If you receive a “code not valid” message try the alternative code. If neither code works it’s likely that your control module doesn’t support VIM adaptation.
  7. Select “Adaptation – 10
  8. Select channel 48
  9. Press read
  10. Set the value to 255
  11. Press test
  12. Press save
  13. Press “Done, Go Back“, close the controller and quit the software
  14. Restart the MMI: Press and hold down the function keys 1 (SETUP), the control button 2 and the control key at the top right 3 simultaneously until the MMI system shuts down. Release keys -> MMI system reboots. 
reboot mmi 3g

OPEN CALCULATOR (CLICK)

Please let us know in comments if its working for You (please also add which audi model and mmi version).

+1+2+3+4+5 (42 votes, average: 3.93 out of 5)

How to convert videos to play on MMI 3G Plus? Click here.

Adam // Carsie.net

Audi maniac, owner of carsie.net and big fan of Audi cars. Maps, firmware, car audio installer
14 Comments
Inline Feedbacks
View all comments
Lorant
Member
Lorant
1 year ago

Audi A4 B8 2009
Original MMI was a 2G high unit and had the MMI 3G PLUS retrofitted.

Thank you for the tutorial! Worked instantly for me with the first generated code and everything went flawlessly, only thing is there was 1-2 minor steps missing out of the tutorial but with common sense you can easily tackle the odd missing go back option. ?

Thank you again!

cdcoding55
Member
cdcoding55
1 year ago

Mk7 GTI (64)

Tried both unique codes and neither work also tried on S3 (8V) & MK7.5 GTI and didn’t work either any ideas ?

tihac64
Member
tihac64
2 years ago

Hello, is this procedure same for RMC and MHI2 systems? Thank you

Jason Whetstone
Member
Jason Whetstone
2 years ago

Where do you get the VCDS cable to plug into car? Also where do you get the software for it?

Jason Whetstone
Member
Jason Whetstone
2 years ago

does this also work for when dvds are playing?

Jason Whetstone
Member
Jason Whetstone
2 years ago

where is that link for the video conversion settings for 3g mmi +

juanangelsilestone
Member
juanangelsilestone
2 years ago

Hi guys, it worked perfectly with the first code, AUDI A5 2015 MMI3Gplus, I did it after updating MMI firmware and maps, many thanks for the turorial 🙂 🙂 🙂