You are currently viewing Mirror tilt when reversing – VCDS

Mirror tilt when reversing – VCDS


On this tutorial i will show you how simply is enabling mirror tilt when reversing. You will need VCDS to do this. You can buy it here!

In VCDS go to block 52 > Coding > Long Coding Helper > Byte 4 and tick Bit 2 & 3 then exit, click on Do it and everything done 🙂 

Your mirror tilt will be working, when left side-view mirror is selected on doors mirror control switch (UK) or right side-view mirror on other countries..

You can also activate many others features via VCDS. We have prepared list of 53 features and method of their activation here!

If you don’t have VCDS we can do that for you. Just contact us to make an appointment – we can go anywhere in U.K.

+1+2+3+4+5 (4 votes, average: 4.25 out of 5)

Adam //

Audi maniac, owner of and big fan of Audi cars. Maps, firmware, car audio installer
Inline Feedbacks
View all comments
2 years ago

During this coding, only the right mirror is tilted when the switch is set on you. When the switch is set to the left mirror, as instructed, neither will fold